To install the motor to my frame, I need a beefy bracket to hold that 2HP motor. I took a scrap piece of 2″x2″ 1/4inch…
Un gros merci à Sébastien Choquette pour m’avoir expliqué comment simuler avec Code Composer Studio (CCS). Pour commencer à utiliser CCS en simulation, il faut…
I order some lithium battery for my scooter. http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=9177 Spec. Minimum Capacity: 5000mAh Configuration: 4S1P / 14.8v / 4Cell Constant Discharge: 20C 20 x 5…
Saturday, my girlfriend and I when to St-Eustache flew market, one of the biggest flew market in Québec. I was able to find the exact…
To make my scooter with my new motor, I needed to change the shaft of the new motor so I could insert the belt pullet…
httpvhd://www.youtube.com/watch?v=KYjtulQ3ocs Here is the first test I did at school. I ask the guys from www.vamudes.com for a 60Amp castle phoenix electric speed controller (ESC…
When I inserted the pulley on the motor shaft, there was some little side mouvement. It was not extremely major but I found this simple…
I have been having real problem at home with my internet provider (Bell sympatico). There is one of there router in Toronto that has a…
This is my first time playing with a brushless motor, I am very intrigue so I had to take it appart. I also needed to…
Voici la superbe photo du tableau.